Checking If Current Drivers Are Loaded; Windows; Linux; Running A Cable Length Test - Broadcom NetXtreme BCM57 Series User Manual

NetXtreme User Guide

Checking if Current Drivers Are Loaded

Windows

See Viewing Adapter Information
connectivity.

Linux

To verify that the TG3 Linux driver is loaded properly, run:
lsmod | grep tg3
If the driver is loaded, a line similar to the one below is displayed, where size is the size of the driver in bytes,
and n is the number of adapters configured.
Module
TG3

Running a Cable Length Test

In Windows environments, a cable length test can be run. See
a cable length test.
Broadcom ®
April 2017 • 2CS57XX-CDUM514-R
to view useful information about the adapter, its link status, and network
Table 23: Linux Driver
Size
size
Used by
n
Analyzing Cables for information about running
Troubleshooting
Page 164