Ws-Man Windows Client Installation - Broadcom NetXtreme BCM57 Series User Manual

NetXtreme User Guide
3. Click Add Port.
4. Enter a meaningful Name, for example "WinRM rule" and port number, for example, 5985 for HTTP or 5986
for HTTPS.
5. Click OK.
Useful WinRM Commands
Command
winrm quickconfig or winrm qc
winrm enumerate winrm/config/Listener
winrm e winrm/config/Listener
winrm get winrm/config/Service
winrm delete winrm/config/
Listener?Address=*+Transport=HTTPS
Useful WinRM Websites
• http://msdn.microsoft.com/en-us/library/aa384372%28v=vs.85%29.aspx
• http://technet.microsoft.com/en-us/library/cc782312%28WS.10%29.aspx
• http://msdn.microsoft.com/en-us/library/aa384295%28v=VS.85%29.aspx
• The following articles on "http://support.microsoft.com:
• "Configuring WINRM for HTTPS"
• "Windows Management Framework (Windows PowerShell 2.0, WinRM 2.0, and BITS 4.0)"

WS-MAN Windows Client Installation

On the Windows client, perform following configuration steps.
1. Perform HTTP Configuration (if you plan to use HTTP)
a. Click Start (or press the Windows logo key) and select Run.
b. Enter gpedit.msc to open the local Group Policy editor.
c. Under Computer Configuration, open the Administrative Templates folder and then open the
Windows Components folder.
d. Select Windows Remote Management (WinRM).
e. Under Windows Remote Management (WinRM), select WinRm Client.
f. Under WinRM Client, double-click Trusted Hosts.
g. In the TrustedHostsList, enter the host names of the clients and click OK. If all clients are trusted then
enter "*" only.
h. Select WinRM Service.
i. Enable Allow Basic Authentication and click OK.
j. Run the following command from the command prompt to test the connection:
winrm id -remote:<remote machine Hostname or IP Address>
2. Perform HTTPS Configuration (if you plan to use HTTPS)
Broadcom ®
April 2017 • 2CS57XX-CDUM514-R
Windows Driver and Management Application Installation
Description
Configures WinRM with default settings
or Helps to check which service listener are enabled and
listening on which port and IP Address.
Checks WinRM Service Configuration.
Deletes a Listener (in this case deleting a HTTPS listener).
Page 29