Setting Up The Bios - Broadcom NetXtreme BCM57 Series User Manual

NetXtreme User Guide
5. Use the drop-down menu to select the boot protocol of choice, if boot protocols other than Preboot Execution
Environment (PXE) are available. If available, other boot protocols include iSCSI and Bootstrap Protocol
(BOOTP).
Note: For iSCSI boot-capable LOMs, the boot protocol is set via the BIOS. See your system
documentation for more information.
6. Use the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT ARROW keys to move to and change
the values for other menu items, as desired.
7. Select Back to go to Main menu
8. Select Finish to save and exit.

Setting Up the BIOS

To boot from the network with the MBA, make the MBA enabled adapter the first bootable device under the
BIOS. This procedure depends on the system BIOS implementation. Refer to the user manual for the system
for instructions.
Broadcom ®
April 2017 • 2CS57XX-CDUM514-R
iSCSI Protocol and Broadcom Boot Agent Software
Page 156