Broadcom NetXtreme BCM57 Series User Manual page 155

NetXtreme User Guide
3. Use the UP ARROW and DOWN ARROW keys to move to the Boot Protocol menu item. Then use the
RIGHT ARROW or LEFT ARROW key to select the boot protocol of choice if other boot protocols besides
Preboot Execution Environment (PXE) are available. If available, other boot protocols include Remote
Program Load (RPL) and Bootstrap Protocol (BOOTP).
Note: For some, but not all, iSCSI boot-capable LOMs, the boot protocol is set via the BIOS. See your
system documentation for more information.
Note: If you have multiple adapters in your system and you are unsure which adapter you are
configuring, press CTRL+F6, which causes the port LEDs on the adapter to start blinking.
4. Use the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT ARROW keys to move to and change
the values for other menu items, as desired.
5. Press F4 to save your settings.
6. Press ESC when you are finished.
Using UEFI
1. Restart your system.
2. Enter the System Setup or Device Setting configuration menu.
3. Select the device on which you want to change MBA settings.
4. Select MBA Configuration Menu.
Broadcom ®
April 2017 • 2CS57XX-CDUM514-R
iSCSI Protocol and Broadcom Boot Agent Software
Page 155