Iris Viewport; Scan Position Montage; 6X6 Mm Montage Angio Scan - Zeiss CIRRUS HD-OCT 500 User Manual

6-22

Iris Viewport

Scan Position Montage

2660021169012 Rev. A 2017-12
Acquire Screen and Controls
The Iris Viewport lies in the upper left quadrant of the main Acquire screen Viewport
(Figure 6-12). During scanning the iris and pupil of the current patient is shown in real
time. Within this viewport you can:
• Select the appropriate lens type from the Lens drop-down menu, depending on the
scan type you have selected.
• Adjust the chinrest either automatically or manually.
• Target the patient pupil using the left mouse button to move the fixation target to the
center of the pupil image.
• Enhance ( ), adjust brightness and contrast (
Proper alignment of the scan beam to the pupil is required in three dimensions, X, Y
(transverse), and Z (axial). CIRRUS provides automated alignment controls by clicking the
Iris Viewport as well as manual controls both on–screen and via the keyboard (X-Y). These
controls will adjust the chinrest and forehead rest so that the eye is properly aligned for the
OCT scan. Start by using the mouse to change depth (mouse wheel), or move left to right.
Once you've aligned the target as well as possible using the mouse controls, use the
manual controls are to fine tune the alignment.
You may also use the keyboard to auto–adjust the alignment by using the keyboard arrow
buttons that correspond to the X-Y controls. Press Ctrl with the keyboard arrow keys for
finer adjustments. Adjustments occur in discrete steps when you click and release. When
you click and hold the arrow, the adjustment motion becomes continuous until you release.
The Scan Position Montage provides a visual representation of the retinal
scan location.

6x6 mm Montage Angio Scan

The 6x6 mm Montage workflow includes 6 scans at different positions and the fixation
moves 4 times.
), or reset the pupil target
CIRRUS HD-OCT User Manual
.