Table of Contents
Advertisement
12-2
Handling Error Messages
Routine Cleaning
2660021169012 Rev. A 2017-12
Routine Cleaning
In normal instrument start–up, the User Login dialog appears. If the system fails the system
check, or if some other error prevents the system's normal function, document the
circumstances and any associated error messages, and report it to Zeiss customer service.
In the U.S., call 800–341–6968. Outside the U.S., contact your local Zeiss distributor.
Often error messages can be resolved with solutions provided over the telephone.
Please be prepared to provide CZMI the serial number of your instrument. It is located on
the label affixed to the back of the instrument, under the rear cover.
Product Labels and Serial Number Location
The product label is located just above the rear cover of the instrument.
To gain access to the label showing the serial number, remove the rear cover. To remove
the rear cover, depress the two snaps at its top edge.
cáÖìêÉ=NOJNW=oÉãçîáåÖ=oÉ~ê=`çîÉê
A small label indicates the month and year of manufacture in MMYYYY format (for
example, 042013).
The forehead and chinrests, and to a lesser extent the imaging aperture and LCD screen,
are the only parts that require routine cleaning. Instructions are included below for
occasional cleaning of the instrument covers and optional power table.
CAUTION: The instrument has no special measures to protect against harmful ingress of
water or other liquids (classified IPX0—ordinary equipment). To avoid damage to the
instrument and a safety hazard, cleaning solutions, including water, must be applied
sparingly, with a non–linting cloth that is dampened only—not dripping wet! You must not
use aerosols on or near the instrument.
CIRRUS HD-OCT User Manual
Advertisement
Table of Contents
Troubleshooting
