Show Settings; Clip Selector - Zeiss CIRRUS HD-OCT 500 User Manual

8-62
Specialized and Integrative Visualization Tools
NOTE: The Save As Global function in this dialog does not save the exam. You must use the
Save Exam icon at the top of the screen to save the settings for the exam.

Show Settings

Click Show... in the Menu to display the Show Settings dialog below.
cáÖìêÉ=UJQQ=pÜçï=pÉííáåÖë=aá~äçÖ
Use the checkboxes to show and hide surfaces and the volumes between or below
surfaces. You can show or hide the cube boundary lines, and show or hide the view from
the top or bottom of the box. The default settings are shown in the figure above.

Clip Selector

Clip Selector allows you to select the whole cube or one of the four niches of the cube.
Once you select a niche, move the colored spheres to cut into the corner to the desired
depth. Figure 8-45 is an example of a niche cut.
cáÖìêÉ=UJQR=káÅÜÉ=`ìí
2660021169012 Rev. A 2017-12 CIRRUS HD-OCT User Manual