Analysis Related Report Options; Macula Thickness Report Options - Zeiss CIRRUS HD-OCT 500 User Manual

10-4

Analysis Related Report Options

Macula Thickness Report Options

2660021169012 Rev. A 2017-12
Analysis Related Report Options
NOTE: Do not be misled by the default message "Save to Tiff" which appears when you
mouse over the Save button at this location. This is an artifact of the default selection, but
in no way represents the only available file format. After you have clicked on the Save icon,
click the lower bar (Save as Types) in the popup window that appears, and select the
format of interest from the drop-down list (see
Close the Review screen by clicking the
the Reports Preview screen and return to the Analysis screen.
Reports distill important information provided on the given analysis screen itself. The
standard (default) options may not always provide all the information required. To
accommodate this you can specify additional information in connection with certain
analyses that will then appear on the selected Report as (an) additional(s) page(s). These
analysis–related special options for reports are specified as follows:
1. From the Toolbar ("Toolbar Options" on page
Configuration. The window shown in
The Printout Configuration window has a total of 5 tabs:
• MTA (Macula Thickness Analysis) Options
• Macula Multi-slice Parameters
• ONH Print Options
• Raster Print Options
• GPA Print Options
Use the arrows at the top right of the window to move through the tabs.
Each of these options is described briefly below.
There are three report styles, selectable as check boxes, from the MTA Options tab of the
Printout Configuration Window, that pertain to Macula Thickness Analysis:
• Macula Thickness
• Macula Multi Slice
• Macula Radial
Figure 10-3).
in the upper right corner of the screen to close
3-5) select Options > Print
Figure 10-4 will appear.
CIRRUS HD-OCT User Manual