Power Up; Power Down; Power Down Through Software; Power Down Through Hardware - Zeiss CIRRUS HD-OCT 500 User Manual

3-2

Power Up

Power Down

2660021169012 Rev. A 2017-12
Hardware
The instrument is powered on just under the monitor (12).
The software will start automatically, and run a Data Validation Check which, once passed,
will allow you to begin setting up your instrument, by pressing Continue.
Should the software fail for any reason, contact Zeiss Customer Service immediately.
You can power down the system either through hardware or through software.
CAUTION: We strongly recommend you power down through software to permit
automatic archiving on shutdown and to avoid abrupt shutdowns that could result
in loss of patient data.

Power Down Through Software

1. Click Logout at the upper right on the ID Patient screen.
2. If archiving is set to occur upon shutdown, (see
the system will prompt you to archive. This is true in both Native and DICOM Archive
modes.
cáÖìêÉ=PJO==^êÅÜáîÉ=mêçãéí=aá~äçÖ=Ó=k~íáîÉ=^êÅÜáîÉ=jçÇÉ
Execute the desired option to advance to the Exit Dialog.
3. When you archive or close the Archive dialog (see above), the Exit Dialog will ask if
you are sure you want to exit.
4. Click Yes to exit the CIRRUS software.
• If you click No, the Login dialog will appear.
After you exit the system software through the soft shutdown sequence, Shutdown the
CIRRUS HD-OCT instrument as you would any other PC.

Power Down Through Hardware

CAUTION: We strongly recommend you power down through software to permit
automatic archiving on shutdown and to avoid abrupt shutdowns that could result
in loss of patient data.
"Archive/Synchronize" on page
cáÖìêÉ=PJP==bñáí=aá~äçÖ
CIRRUS HD-OCT User Manual
4-8),