Archive Setup And Selection; Set Up A Cirrus Hd-Oct Archive - Zeiss CIRRUS HD-OCT 500 User Manual

4-6

Archive Setup and Selection

Set up a CIRRUS HD-OCT Archive

2660021169012 Rev. A 2017-12
Archive Setup and Selection
Operators as well as Admin's may set up and specify archives. However, it is recommended
that the Admin oversee archive setup, in order to ensure that patient data is kept cohesive
and transparent within the institutional environment.
NOTE: You cannot set up an archive from a Review Station in instrument mode.
1. From the CIRRUS HD-OCT instrument, obtain the name and location of the shared
folder on the Network File Server that will be used to archive your data (see Chapter 4
CIRRUS HD-OCT Installation Guide
of the
2. Log in as a CIRRUS operator.
3. From the Toolbar, select Records > Archive Management. The Archive Registration
dialog box appears (see Figure
cáÖìêÉ=QJT==kÉï=^êÅÜáîÉ=oÉÖáëíê~íáçå=aá~äçÖ
4. In the Archive Locations dialog, click New. The New Archive Registration dialog
appears, as shown below
).
4-7).
(Figure 4-8).
CIRRUS HD-OCT User Manual