Staff Accounts; Register New Staff - Zeiss CIRRUS HD-OCT 500 User Manual

Staff Accounts

Register New Staff

CIRRUS HD-OCT User Manual
2. In the Station Name and AE Title fields, type in the desired information. The
remainder of the information is already set.
NOTE: The AE Title is originally determined during setup of the DICOM Gateway which is
discussed in Chapter 11 "Data
3. Click Save to save your changes and exit the dialog, or click Close to exit the dialog
without saving.
It is strongly recommended that you create individual user accounts for each staff member
who acquires or analyzes scans, and that staff members routinely log out to secure the
instrument. Following these procedures helps prevent unauthorized access to CIRRUS
HD-OCT data and functions, and enables accurate record–keeping.
For record–keeping, CIRRUS HD-OCT records the user name under which each scan is
acquired; it displays the current user next to the Logout link at upper right.
1. From the Toolbar ("Toolbar Options" on page
Users. The Staff Registration dialog box will appear as shown in
2. Click New. The New Staff dialog box appears.
3. Edit the staff registration fields as desired. A staff record must have either a last name
or first name or both; other fields are optional. To log in with the specified user ID and
acquire scans, the Operator checkbox must be selected. When finished with your
changes, click Save. Both user names and passwords are case–sensitive. Once logged
in, any user can change his or her own password by selecting Options > Change My
Password see "Toolbar Options" on page
of this feature by creating new user accounts with a temporary password, providing it
to the user, and asking the user to change the password.
Management". These names must match.
3-5) select Tools >Options >
cáÖìêÉ=QJP==kÉï=pí~ÑÑ=aá~äçÖ
3-5. The
Admin
2660021169012 Rev. A 2017-12
4-3
Staff Accounts
Figure 4-3.
may take advantage