Pnp/Pci Configurations - Shuttle FB75 User Manual

@

PnP/PCI Configurations

This category configures how PnP and PCI operate in your system.
Correctly setting up the IRQ and DMA (both PnP and PCI use) assign-
ments will make your system work stably. It is strongly recommended
that only technical users make changes to the default settings.
Reset Configuration Data
When enabled, any PnP configuration data stored in the BIOS will be
cleared from memory, with new data created.
Ø The choice: Enabled or Disabled.
Resources Controlled By
As stays Auto(ESCD), the system will dynamically allocate resources to
PnP devices as they are required. As set to Manual, the following item
becomes available.
Ø The choice: Auto(ESCD) or Manual.
IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3,
4, 5, 7, 9, 10, 11, 12, 14, and 15.
Ø The choice: PCI Device or Reserved.
PCI/VGA Palette Snoop
It determines whether MPEG ISA/VESA VGA cards can work with PCI/
VGA or not. If you have MPEG ISA/VESA VGA cards and PCI/VGA
works, select Enabled. Otherwise, disable it.
Ø The choice: Enabled or Disabled.
INT Pin 1/2/3/4/5/6/7/8 Assignment
This item names the IRQ line assigned to a device connected to the PCI
interface on your system.
Ø The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, or 15.
- 61 -