Shuttle FB75 User Manual page 59

*** On-Chip Serial ATA Setting ***
SATA Mode
This item defines the serial ATA mode.
Ø The Choice: IDE or RAID.
On-Chip Serial ATA
This item defines the onboard serial ATA.
Ø The Choice: Disabled, Auto, Combined Mode, Enhanced Mode, or
SATA Only.
Serial ATA Port0 Mode
This item defines the serial ATA1 mode.
Ø The Choice: Primary Master, Primary Slave, Secondary Master,
Secondary Slave, SATA0 master, or SATA1 master.
Serial ATA Port1 Mode
This item defines the serial ATA2 mode.
Ø The Choice: Primary Master, Primary Slave, Secondary Master,
Secondary Slave, SATA0 master, or SATA1 master.
Onboard Device
Press <Enter> to enter the sub-menu of detailed options.
USB Controller
Do not disable this item if your system has a USB port installed on the
system board and you want to use it.
Ø The Choice: Enabled or Disabled.
USB 2.0 Controller
Do not disable this item if your system has a USB 2.0 controller installed
on the system board and you have USB peripherals.
Ø The Choice: Enabled or Disabled.
USB Keyboard Support
Select Enabled if your system contains a USB controller and you have a
USB keyboard.
Ø The Choice: Enabled or Disabled.
AC97 Audio
This item allows you to control the OnChip Audio.
Ø The Choice: Auto or Disabled.
Onboard Lan Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
Ø The choice: Enabled or Disabled.
- 55 -