Shuttle FB75 User Manual page 63

4 Sec., then you have to hold the power button down for 4 seconds to
cause a software power down.
Ø The choice: Delay 4 Sec. or Instant-Off.
Wake-Up by PCI card
This item leaves PCI cards wake up the system from the suspend mode.
Ø The choice: Enabled or Disabled.
Power On by Ring
This item defines the system will resume by activating of modem ring.
Ø The choice: Enabled or Disabled.
USB Wake-Up From S3
If you are using USB devices, and the ACPI Suspend Type is set to S3 or
S1&S3, enable this item to have USB devices wake up the system from
power saving mode.
Ø The choice: Enabled or Disabled.
Resume by Alarm
When set to Enabled, the following two items become available and
you can set the date, hour, minute and second to turn on your system.
Ø The choice: Enabled or Disabled.
Date(of Month) Alarm
This item selects the alarm Date (day of the month).
Ø Key in a DEC number: Min=0, Max=31.
Time(hh : mm : ss) Alarm
This item selects the alarm Time.
[hh] Ø Key in a DEC number: Min=0, Max=23.
[mm/ss] Ø Key in a DEC number: Min=0, Max=59.
** Reload Global Timer Events **
Global Timer (power management) Events are I/O events whose occur-
rence can prevent the system from entering a power saving mode or
can awaken the system from such as a mode. In effect, the system
remains alert for anything that occurs to a device that is configured as
Enabled, even when the system is in a power-down mode.
Primary/Secondary IDE 0/IDE 1
When these four items are enabled, the system will restart the power-
saving timeout counters when any activity is detected on any of the
drives or devices on the primary or secondary IDE channels.
Ø The choice: Disabled or Enabled.
- 59 -