Shuttle FB75 User Manual page 4

(C) Remedy for the Tested Product & Its EMI Interference:
Remedy: N/A
EMI Interference:
Crystal: 14.318MHz(X2)/ 24.576MHz(X3)/ 25.00MHz(X4)/ 32.768KHz(X1)
Clock Generator: U5
(D) Supported Host Peripherals:
Host Peripheral
#1
#2
#3
#4
#5
#6
#7
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI or AGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Product Name
Case
Power Supply (300W)
Maxtor HDD (40 GB)
Panasonic FDD
Pioneer DVD Player
AGP Card
Power Cable
Model Name
SB75
AM630BS20S
D740X-6L
JU-257A606P
DVD-116
Winfast Geforce 2 MX
Detachable and Shielded
S/N
N/A
0005596 D33047
N/A 3902B975
AAMS027197WL 3892D029
3892C520
FCC ID