Shuttle FB75 User Manual page 12

- I/O Interface
Provides a variety of I/O interfaces:
Ø 1 Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø 2 x Serial ports
Ø 1 x 1394a port
Ø 4 x USB ports
Ø 1 x Giga LAN port
Ø 1 x PS/2 Mouse
Ø 1 x PS/2 Keyboard
Ø 1 x Center/Bass-Out port
Ø 1 x Rear-Out port
Ø 1 x Line-Out port
- PCI Bus Master IDE Controller Onboard
Two ultra DMA 100/66/33 bus master dual-channel IDE ports support up to
four IDE devices (one Master and one Slave per channel).
The IDE bus implements data transfer speeds to 100/66/33MB/sec and sup-
ports enhanced PIO modes.
80-pin cable backward compatible legacy ATAPI devices, ATAPI IDE CD-ROM,
CD-R, CD-RW, and LS-120 supports.
- ATX Power Supply Connector
ATX power supply unit can be connected to the onboard 20-pin ATX power
connector, and 4-pin ATX power connector. The unit supports Suspend and
Soft-On/Off modes by the dual-function power button.
- Advanced Configuration and Power Interface
Features four power-saving modes: S1 (Snoop), S3 (Suspend to RAM), S4
(Suspend to DISK), and S5 (Soft-Off). ACPI provides more efficient energy-
saving features controlled by your operating system that supports OS Direct
Power Management (OSPM) functionality.
- System BIOS
Provides licensed Award BIOS V6.0 PG on the 4Mb Flash EEPROM, and
supports Green PC, Desktop Management Interface (DMI).
- 8 -