Pnp/Pci Configurations - Shuttle FB81 Manual

@

PnP/PCI Configurations

This section describes the configuration of PCI bus system. PCI or Per-
sonal Computer Interconnection is a system which allows I/O devices to
operate at the speed CPU itself keeps when CPU communicating with its
own special components. This section covers some very technical items,
and it is strongly recommended that only experienced users should make
any changes to the default settings.
Init Display First
When the PAGE56 "PEG/Onchip VGA Control" item is Auto or Onchip
VGA or PEG Port, this item can be selected.
Select the priority of VGA device "PCI Slot" or "Onboard" if there is not
PCI Express VGA Card in system.
Select the priority of VGA device "PCI Slot" or "PCI Ex" if install PCI
Express VGA Card in system.
Ø The choice: PCI Slot, Onboard or PCI Ex.
Reset Configuration Data
Normally, you leave this field Disabled.
Select Enabled to reset Extended System Configuration Data (ESCD) when
you exit from Setup if you have installed a new device or software and the
system reconfiguration has caused such a serious conflict that the operat-
ing system can not boot.
Ø The choice: Enabled or Disabled.
- 68 -