Step 1 Cpu Installation - Shuttle FB75 User Manual

Step 1
CPU Installation:
This mainboard supports Intel Pentium 4 Socket 478 series CPU. Please
follow the steps as follows to finish CPU installation.
Note the CPU orientation when you plug it into CPU socket.
1. Pull up the CPU socket lever to 90-degree angle.
2. Locate Pin 1 in the socket and look for a black dot or cut edge on the CPU
upper interface. Match Pin 1 and cut edge, and insert the CPU into the
socket.
3. Press down the CPU socket lever and finish CPU installation.
4. Intel Pentium 4 processors require a set of heatsink and fan to cool down the
processor. You need to purchase a heatsink and fan if they are not bundled
with your CPU. Required is that install the set and plug its cable in the CPU
fan power connector. Note that there are kinds of CPU fan connectors. Nor-
mally, if your mainboard supports a hardware monitoring function, a 3-pin
fan power connector can have your system detect the CPU fan's speed. A
CPU fan with a 2-pin or 4-pin fan power connector does not support the
detection of the CPU fan's speed, and must directly be connected to the
system's power supply unit.
CPU socket lever up to
90-degree angle
CPU Pin 1 and cut edge
Note: The CPU might be
damaged if you do not match
the CPU socket Pin 1 and cut
edge well.
- 11 -