Green Led/Power Led Connector (Gled/Pled); Hardware Reset Connector (Rst) - Shuttle FS56 User Manual

C3

Green LED/Power LED Connector (GLED/PLED)

This header is dual color LED function.
Dual color LED function is defined by either Power LED or Green LED, the
header can be in these states.
The Green LED indicates that the system is currently in one of the power saving
mode (Doze/Standby/Suspend). When the system resumes to normal opera-
tion mode, the Green LED will go off, power LED on.
This Power LED will go off during power saving mode.
Attach a 2-pin Green LED/Power LED cable to (GLED/PLED) header.

Hardware Reset Connector (RST)

C4
Attach the 2-pin hardware reset switch cable to the (RST) header. Pressing the
reset switch causes the system to restart.
Front Panel
RST HLED
- + - +
+ - - +
PWONGLED/PLED
- 30 -
4 2
GLED
-
+
1
4 2
JP8
PLED
+
-
Front Panel
RST HLED
- + - +
1
+ - - +
PWONGLED/PLED
JP8