Table of Contents
Advertisement
- I/O Interface
Provides a variety of I/O interfaces:
Ø 1 x Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø 1 x DB15 VGA connector.
Ø 2 x DB9 Serial connectors 16550 UART compatible.
Ø 2 x 1394 connectors.
Ø 1 x RJ45 LAN connector.
Ø 1 x PS/2 mouse connector.
Ø 1 x PS/2 Keyboard connector.
Ø 1 x 5.1-Channel Front-Out port.
Ø 1 x 5.1-Channel Rear-Out port.
Ø 1 x 5.1-Channel Center/Bass-Out port.
- PCI Bus Master IDE Controller Onboard
Two Ultra DMA 33/66/100/133 Bus Master Dual-channel IDE ports provide
support to a maximum of four IDE devices (one Master and one Slave per chan-
nel). The IDE Bus implements data transfer speeds of up to 33/66/100/133
MB/sec and also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW and LS-120 Supports.
- ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin Pentium 4
standard ATX power connectors, supporting Suspend and Soft-On/Off by
dual-function power button.
The Pentium 4 ATX power include other 4-pin +12V ATX power connector.
- Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4
(Suspend to DISK) and S5 (Soft-Off). ACPI provides more efficient Energy
Saving Features controlled by your operating system that supports OS Direct
Power Management (OSPM) functionality.
- 9 -
Advertisement
Table of Contents
