F
Front-Panel Connectors
ATX Power On/Off Switch Connector (PWON)
C1
The Power On/Off Switch is a momentary type switch used for turning on or off
the system ATX power supply. Attach the connector cable from the Power Switch
to the 2-pin (PWON) header on the mainboard.
Note : Please notice all the LED connectors are directional. If your chassis's
HDD LED Connector (HLED)
C2
Attach the connector cable from the IDE device LED to the 2-pin (HLED) header.
The HDD LED lights up whenever an IDE device is active.
LED does not light up during running, please simply change to the
opposite direction.
- 29 -
Front Panel
RST HLED
- +
- +
1
+ - - +
PWONGLED/PLED
JP8
Front Panel
RST HLED
- +
- +
1
+ - - +
PWONGLED/PLED
JP8