Shuttle FS56 User Manual page 57

CPU L1 & L2 Cache
This item enables CPU L1 internal and CPU L2 cache to speed up
memory access.
Ø The choice: Enabled or Disabled.
CPU L3 Cache
This item enables CPU L3 cache to speed up memory access.
Ø The choice: Enabled or Disabled.
Hyper-Threading Technology
The latest Intel application defines a high-speed calculating ability to
optimize your system by two CPUs supported (one virtual, one physi-
cal) in a multi-task environment.
Ø The choice: Enabled or Disabled.
CPU L2 Cache ECC Checking
When you select Enabled, memory checking is enabled when the
CPU internal L2 cache contains ECC SRAMs.
Ø The choice: Enabled or Disabled.
Quick Power On Self Test
This item speeds up Power-On Self Test (POST) after you power on the
computer. If it is set to enabled, BIOS will shorten or skip some check
items during POST.
Ø The choice: Enabled or Disabled.
First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
Ø The Choice: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1,
HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM,
USB-HDD, LAN or Disabled.
Boot Other Device
Select Your Boot Device Priority.
Ø The choice: Enabled or Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive
name assignment.
Ø The choice: Enabled or Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot-Up. Disabling speed boots up.
Ø The choice: Enabled or Disabled.
- 53 -