Table of Contents
Advertisement
Extended USB Header (JP3)
C6
Header JP3 is used to connect cables to USB connectors mounted on front-
panel or back-panel. The USB cable is optional at the time of purchase.
F
Internal Peripherals Connectors
Enhanced IDE and Floppy Connectors
D1
The mainboard features two 40-pin dual-channel IDE device connectors
(IDE1/IDE2) providing support for up to four IDE devices, such as CD-ROM
and Hard Disk Drives (H.D.D.).
This mainboard also includes one 34-pin floppy disk controller (FDC) to
accommodate the Floppy Disk Drive (FDD). Moreover, this mainboard
comes with one 80-pin ATA 133/100 ribbon cable to connect to IDE
H.D.D. and one 34-pin ribbon cable for F.D.D. connection.
Important : Ribbon cables are
directional, therefore, make sure to
always connect with the red cable
stripe on the same side as pin #1
of the IDE1/IDE2 or FDC connec-
tor on the mainboard.
1
2
3
4
5
6
7
8
9
10
1
JP3
1
- 32 -
USB
JP3
1
IDE2
FDD
1
IDE1
Advertisement
Table of Contents
