Table of Contents
Advertisement
BEFORE TRANSMITTING/COPYING
To perform this operation:
a.
Press FUNCTION followed by 2.
b.
Press START to access the menu.
Press ∨ ∨ or ∧ ∧ to select the parameter that you want
c.
to program.
Example: Select the "IMAGE" parameter.
d.
Press START to start programming the parameter
selected. The display shows the current value of the
selected parameter.
e.
Press SET/CONF. to confirm the value or:
press ∨ ∨ or ∧ ∧ to select an alternative value (64 GREY
TONES or OFF).
The facsimile machine is automatically set for the
next parameter.
Repeat the procedure from step c if you wish to
program the remaining parameters or:
press STOP twice to quit the menu.
50
cap08.p65
50
F U N C T I O N
2 : P R E P A R A T I O N
P R E P A R A T I O N
R E S O L U T I O N
P R E P A R A T I O N
I M A G E
I M A G E
T E X T / I M A G E
P R E P A R A T I O N
C O N T R A S T
13/04/00, 22.27
Advertisement
Table of Contents
