PROGRAMMING
6.
Press START .
The facsimile is automatically set for entry of the data
to be associated with the selected speed dialling
code.
If you want to skip a parameter, simply press the ∨ ∨ or
∧ ∧ key. Each time the key is pressed, the next parameter
will be displayed.
7.
Press START to start setting the parameter selected,
e.g. "FAX NO."
8.
Enter the relevant facsimile number - max. 32 digits
- on the numeric keypad, e.g. 0125 45812.
Remember that numbers associated with the
extended speed dialling codes 31 and 32 may consist
of 100 digits.
∗
By pressing the
key, you can switch to tone dialling.
∗
The "
" symbol appears on the display.
If the display shows a previously set number, you can
confirm it by pressing SET/CONF. , or replace it with
a new number by typing the new number on the
numeric keypad and pressing SET/CONF .
To delete a setting, press CLEAR .
To make a correction, move the cursor to the digit to
be changed (using the < or > keys) and overwrite it
with the new digit.
If you want to insert a blank between one digit and
another, press the > key to move the cursor one
position forward.
By pressing EXT./PAUSE you can insert one or
more pauses (during dialling) between the digits in
the number. The pause is identified on the display by
the character "p". It is a good idea to insert a pause
between the code and the number.
In some countries, a second answering tone must be
heard before the whole number can be dialled. In this
case, press 2nd DIAL TONE . The display shows the
symbol ":".
If the facsimile machine is connected to an exchange
and the user is an external user, press EXT./PAUSE
before entering the number. In this case the display
shows the letter "E" before the numeric sequence.
24
cap05.p65
24
S P E E D D I A L
0 6 :
E N T E R
0 1 2 5 4 5 8 1 2
13/04/00, 22.17
F A X
F A X N O .
+