Table of Contents
Advertisement
Repeat the procedure from step 3 if you want to
continue programming the other parameters, or:
press STOP twice to quit the menu.
The table below shows all the operating configuration parameters. The initial value of each parameter is
underlined.
The names in the PARAMETER column appear in their abbreviated form, exactly as they appear on the display,
while the full form of each parameter is given in the "Function keys" section of the "GETTING TO KNOW THE
FACSIMILE MACHINE".
Operating configuration parameter table
PARAMETER
ECM
AUTOMATIC RX
FAX/PHONE SWITCH
FAX/TAD
SENDER ID POSITN
cap07.p65
OPERATING
VALUES
YES:
ECM enabled.
NO:
ECM disabled.
YES:
Automatic reception.
NO:
Manual reception.
YES:
function enabled.
NO:
function disabled.
YES:
function enabled.
NO:
function disabled.
SUPERIMPOSED
TOP EDGE
41
PROGRAMMING
MEANING
Error Correction Mode
Enables you to send/receive a document
correcting errors caused by line
interference which would otherwise
prevent the document from being read.
This function is only active when both
facsimile machines have the feature.
Enables/disables automatic reception.
Automatically distinguishes between
facsimile and telephone calls. This
function can only be enabled when it has
been activated by the customer
engineering service.
Enables/disables connection to a tele-
phone answering device and recognition
of the dialling tone. This function can
only be enabled if activated by the
customer engineering service.
Selects the position in which the sender
ID line is to be printed.
13/04/00, 22.23
+
41
Advertisement
Table of Contents
