Replacement Of The Electrical Components - Sungrow SG2500-MV System Manual

12 Routine Maintenance
Check the protective paint on the inverter surface for peeling off. Please
re-paint the inverter surface if necessary.
Re-spray the protective paint every 3-5 years to the inverter surface.
12.5

Replacement of the electrical components

The electrical components inside the inverter must be replaced by the same
components from the same manufacturer and with the same model number.
The model number can be acquired from the marking of the inverter or the
component itself. If otherwise, please contact Sungrow.
If the field work needs to replace the components with products from other
manufacturer or with different model number, a prior analysis and confirmation
by Sungrow is needed.
Failure to follow this procedure may lead to physical injury or death and void all
warranty from Sungrow.
92
System Manual