Formatting The Sd Card; Using The Sd Card - Sanyo S103 Getting Started

Using the SD memory card

Formatting the SD card

Before using a new SD Card
which has not yet been formatted
or a card which has been used in
a PC or other device, use this
function to format the card. Note
that all the data stored on the card
is deleted when you format it.
1 Press O, highlight and
press O.
2 Select Memory Settings and
press O.
3 Select Memory Card and
press O, then select Format
and press O.
4 Enter your security code and
select [YES] at the confirmation
display.
Caution: Do not try to remove the SD
Card while formatting it.
96
Icons related to data on the SD
Card
An SD Card is inserted. (write
protect lock is off)
An SD Card is inserted. (write
protect lock is on)
Note: If an unsupported SD Card is
inserted into the phone, the
icons shown above will not
appear.
Using the SD memory card

Using the SD card

Transfer (Backup) functions
You can transfer (backup) data to
or from the phone and the SD
Card. Take care while performing a
backup as in either case data in
the saving location is overwritten.
1 Press O, highlight and
press O,
2 Select Memory Settings,
Memory Card, then Backup
and press O.
• A data selection window
appears. Select backup data
from All, Picture Gallery,
Video Gallery, Sound
Gallery, and other similar
items.
3 Select the type of data for
backup and press O.
4 Select Save to Memory Card
or Read from Memory Card
and press O.
Save to Memory Card: Saves the
selected type of data in
the phone's memory
onto the SD Card as
backup data. Enter
your security code to
proceed.
Read from Memory Card: Saves
the selected type of
data on the SD Card in
the phone as backup
data. Enter your
security code, and then
select [YES] at the
confirmation display.
97