Call Settings - Sanyo S103 Getting Started

Settings

Call settings

Call diverting service
Subscribing to this service enables
you to divert incoming calls to the
numbers you have specified.
Setting numbers for both video
calls and voice calls is available.
1 Open the Diverts display.
• Press O → → Call
Settings → Diverts
2 Select Voice or Video Call and
press O.
3 Select All Calls, When Busy,
No Answer, or Not Reachable
Status, and then select On and
press O.
4 Enter the destination number
and press O.
124
Setting Reject Calls
You can reject calls according to
the settings described below.
1 Open the Reject Calls display.
• Press O → → Call
Settings → Reject Calls
2 Select On and press O.
3 Enter your security code.
4 Select a rejecting method and
press O.
Specific Numbers: Rejects calls
from the numbers
registered in the list.
You can add or edit
numbers to be rejected
by pressing [List].
Anonymous: Rejects calls from the
numbers intentionally
set as No Caller ID
number by the caller.
Payphone: Rejects calls from a
pay phone.
Unidentified: Rejects caller-
unidentified calls.
Non-registered No: Rejects calls
whose numbers are
not stored in
Phonebook.
Setting the Hold Settings
This function enables you to select
a picture or video to display while
you have someone on hold.
1 Open the Hold Settings display
• Press O → → Call
Settings → Hold Settings
2 Select Original or Gallery,
press O, and specify the
location of the file.
Settings
Setting the Auto Answer (Video
Call Auto Answer)
This function (available with the
use of a headset) enables you to
receive calls automatically without
touching any keys after a preset
ringing time. For setting the Auto
Answer for the video call function,
refer to "Auto Answer" under the
Video Call settings section. (See p.
XX.)
1 Open the Voice Call Auto
Answer display.
• Press O → → Call
Settings → Voice Call Auto
Answer
2 Select On and press O.
• To release the setting, select
Off.
3 Enter the answering time (1 to
29 seconds) and press O.
125