Sanyo S103 Getting Started page 27

Table of Contents

Advertisement

Using the still and video camera
3 Select a pattern and press O. If
you select Off, no date stamp
is made.
• You can also change the date
stamp colour. To do this,
press [Prev.] or [Next].
Recording a video without
sound (For video camera only)
1 Press [Options] while monitor-
ing a subject, select Video
Settings and press O.
2 Select Voice and press O,
then select Off and press O.
Setting a shutter capture tone
1 Press [Options] while monitor-
ing a subject, select Camera
Settings and press O.
2 Select Shutter Tone and press
O.
54
3 Select a shutter tone pattern
and press O.
• Each preset tone sounds
when highlighted for you to
confirm before selecting.
Reducing flicker
Occasionally the image may flicker
due to less than optimal local
frequency. You can use the
"Flicker-free" function to reduce
this problem. Flicker is likely to
occur when you move between
areas using different frequencies
(50 hertz or 60 hertz).
Note: It is possible that the flicker may
not be eliminated completely
even after the setting is
changed. However, this is not
considered to be a problem with
the phone.
Using the still and video camera
1 Press [Options] while monitor-
ing a subject, select Camera
Settings and press O.
2 Select Flicker-free and press
O.
3 Select 50 Hz or 60 Hz and
press O.
Adding a Theme to the edge of
the photo or video
You can add or change the Theme
(frame) of a photo or video.
1 Press [Options] while monitor-
ing a subject, select Camera
Settings and press O.
2 Select Theme and press O.
3 Press [Prev.] or [Next] to
change the Theme type and
press O to select.
Selecting the storage location
(SD Card or Handset)
Before saving, you can select to
save your photos or videos either
on the handset or on the inserted
SD Card.
1 Press [Options] while monitor-
ing a subject, select Camera
Settings and press O.
2 Select Storage Device and
press O.
3 Select Handset or Memory
Card and press O.
Checking the remaining memory
You can check how much memory
has been used and remains for
storing as a percentage and in
megabytes.
55

Advertisement

Table of Contents
loading

Table of Contents