Sanyo S103 Getting Started page 25

Using the still and video camera
Setting the image quality
1 Press [Options] while monitor-
ing a subject, select Image
Settings (Video Settings) and
press O.
2 Select Quality and press O.
3 Select Superfine, Fine, or
Normal and press O.
Superfine: Highest image quality but
large file size. Not recom-
mended if you want to save
many files as it consumes
more memory.
Fine: Highly detailed image qual-
ity.
Normal: Standard image quality and
relatively small file size so
you can save many files.
50
Adjusting the brightness or
white balance
The colour of a photo can differ
depending on the lighting source,
be it natural or incandescent light.
You can compensate for the
difference by using the white
balance to adjust the colour.
1 Press [Options] while monitor-
ing a subject, select Image
Settings (Video Settings) and
press O.
2 Select White Balance and
press O.
3 Select the white balance type
and press O.
Note: You can also adjust the white
balance by pressing v while
monitoring the subject.
Using the still and video camera
Adjusting lighting compensation
(For still camera only)
Your S103 is able to adjust the
lens exposure to suit various
scenes.
1 Press [Options] while monitor-
ing a subject, select Image
Settings and press O.
2 Select Scene and press O.
3 Select Normal, Night Scene,
or Light Shielding and press
O.
Using the Self-timer
1 Press [Options] while monitor-
ing a subject, select Camera
Settings and press O.
2 Select Self-timer and press O.
3 Select a time before the shutter
is released and press O.
4 Press O to start the count-
down.
Note: A beep sounds once every
second starting 3 seconds
before the shutter is released.
The flashing LED colour
changes from green to red 3
seconds before the shutter is
released.
Setting the Shooting Time (For
video camera only)
This function allows you to set the
duration of a video recording time.
The recording stops automatically
after the set time.
1 Press [Options] while monitor-
ing a subject in the video
camera mode, select Shooting
Time and press O.
2 Select a recording time and
press O.
51