Sanyo S103 Getting Started page 61

Settings
Tip: To set the tone volumes for all the
situations above, press [Set All] in
step 1 above.
Setting vibration to confirm the
connection
This function enables the phone to
vibrate when the other party's
phone has detected your call. It is
set to Off by default.
1 Open the Vibrate on Connec-
tion display.
• Press O → → Phone
Settings → Vibrate on
Connection
2 Select On and press O.
122
Setting the melody played until
your video call is connected
This function enables you to listen
to a melody instead of a ringing
tone until the other party answers
your video call.
1 Open the Video Call Tone
display.
• Press O → → Phone
Settings → Video Call Tone
2 Select On and press O to
activate the function. Two menu
items appear with icons. Press
[Set] after you finish completing
the settings below.
(Melody): Selects a sound or
melody pattern for a
Video Call Tone either
from the preset
(Original) patterns or by
searching through the
Gallery.
(Volume): Adjusts the volume
for the Video Call Tone.
Setting Auto Power On/Off
You can set your phone to be
turned on or off automatically at a
set time.
Caution: Please make sure that Auto
Power On is deactivated
before boarding an aircraft.
1 Open the Auto Power On/Off
display.
• Press O → → Phone
Settings → Auto Power On/
Off
2 Select Auto Power On or Auto
Power Off and press O.
3 Select On and press O, and
Settings
then enter the time to turn on
or off.
4 Press [Set] or O after you finish
the setting.
Answering or ending a call with
a sliding motion (Slide Activa-
tion)
This function enables you to
answer a call by sliding the phone
open or end a call by sliding the
phone closed.
1 Open the Slide Activation
display.
• Press O → → Phone
Settings → Slide Activation
2 Select Open to Talk or Close
to End and press O.
3 Select On and press O.
• To release the setting, select
Off at this point.
123