Sanyo S103 Getting Started page 14

Basic operations
1 After pressing d to display the
word selection window in T9
mode, press [Spell]. The Add
New Word window appears
and the input mode is changed
to Standard text input mode.
2 Enter the word following the
Standard text input procedure.
3 Press [Insert]. The word is
entered and also stored in the
T9 dictionary.
Tip: It is also possible to add a word to
the T9 dictionary after the word is
entered. Placing the cursor at the
beginning or end of the word you
want to add to the T9 dictionary,
press [Range], highlight the word
using the navigation keys, and
press [End]. Select Save to
Dictionary and press O. Press
the left soft key O to confirm.
28
Tip: You can re-select the accepted
word. Move the cursor backward
and the word becomes under-
lined. Press d while underlined
and the word selection window
re-appears.
Entering numbers
The following indicate three
different methods of number entry.
• Press and hold ; repeatedly
until the numeric mode indicator,
123, appears. To enter numbers
in Numeric mode, just press the
corresponding numeric key(s).
• In Standard text input mode,
press the desired numeric key
repeatedly until it appears.
• You can also enter numbers by
pressing and holding the
numeric keys both in Standard
text input or in T9 modes.
Entering symbols
1 Press and hold n in text input
mode. The symbol selection
window appears.
2 Select the symbol and press O
to accept it and return to the
message entry field. Or you can
press [CONT] to enter the
selected symbol and retain the
symbol selection window to
enter another symbol.
Tip: From the window displaying a list
of symbols, press n to display
emoticons. Emoticons are
categorized and listed in another
window. Press l / r or [Next PG]
to switch to a different emoticon
category.
Basic operations
Deleting letters
• Press B to backspace and
delete a single letter.
• Press and hold B to back-
space and delete an entire text
field.
Tip: You have another option to delete
letters. Place the cursor at the
point to or from where you wish to
delete letters. Then press
[Options], select Delete and press
O, and then select Delete before
cursor, Delete after cursor or
Delete All.
29