Sanyo S103 Getting Started page 26

Using the still and video camera
Note: The recording time options vary
according to the video data
quality. If Maximum is selected,
the available maximum
recording time is displayed while
recording.
Taking a photo with a frame (For
still camera only)
You can add a frame to a photo
before it is taken. Note that when
a photo is taken with a frame, you
cannot remove the frame after-
wards. Image setting must be on
QQVGA, or QVGA.
1 Press [Options] while monitor-
ing a subject, select Image
Settings and press O.
2 Select Frame and press O.
3 Select On and press O. A
frame appears.
52
4 Press [Prev.] or [Next] to
change the frame pattern and
press O to select.
Changing the photo (video data)
saving size
You can select photo (video data)
size to store. The larger the size is,
the better the data quality is.
1 Press [Options] while monitor-
ing a subject, select Image
Settings (Video Settings) and
press O.
2 Select Image Size and press
O.
3 Select a photo size (video data
size) and press O.
Note: You can also press w while
the still camera or video camera
is activated, and the data size
will change as follows:
Using the still and video camera
• In the still camera mode: QQVGA
(120*160) → QVGA (240*320) →
VGA (640*480) → SXGA
(1280*960, unavailable for the
front camera lens) → Back to
QQVGA (120*160) again.
• In the video camera mode: SQCIF
(128*96) → QCIF (176*144) →
Back to SQCIF (128*96) again.
Adding special effects to a
photo/video
You can make the subject look
different by adding special and
artistic effects.
1 Press [Options] while monitor-
ing a subject, select Image
Settings (Video Settings) and
press O.
2 Select Special Effects and
press O.
3 Select On and press O. The
screen turns to Sepia colour.
4 Press [Prev.] or [Next] to
change the special effects and
press O to select.
• The available patterns are:
Sepia, Black and white, Red,
Green, Blue, Purple, and
Negative.
Inserting time and date (Date
Stamp) (For still camera only)
This function enables you to add
time and date to a QQVGA or
QVGA sized still image.
1 Press [Options] while monitor-
ing a subject, select Image
Settings and press O.
2 Select Date Stamp and press
O.
53