Reset - Barco FL40 series User Manual

System settings menu

9.5 Reset

What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
Topic
UserInterface
Network
System
Screen
Optics
Illumination
ImageConnector
ImageResolution
ImageWarp
ImageBlend
ImageRealColor
ImageStereo
ImageDisplay
ImageOrientation
ImageSource
ImageFeatures
108 R5910123 /00 FL40 / FS40 Projectors
Setting
Theme
Communication
Eco Mode (if applicable)
Screen luminance - Unit
High Contrast
Power
Color Space
Signal Range
Output Resolution (if applicable)
Screen size
4 corner
Bow
Warp files
Blend/Mask size
Black Level
Black Level Files
Blend Files
P7 Realcolor
Sync delay
Swap eye
Dark time
Display mode
Orientation
Source files
Contrast
Brightness
Saturation
Sharpness
Gamma
Cropping (if applicable)
Aspect Ratio (if applicable)
Default value
Light
LAN, Automatic settings
Available
nits
Off
100%
auto
auto
4K UHD
5120x3200 / 2560x1600
Warp off, no warp
Disabled, no files selected
disabled, all value to zero
Disabled, no files selected
all set to native
0 µs
Off
lowest value available
AutoStereo
Table, Front
Standard
mid value
mid value
mid value
mid value
mid value
Off
16:9