Safety Symbols Fl40 / Fs40 - Barco FL40 series User Manual

may result in damage and will often require extensive work by a qualified technician to restore the
product to normal operation.
- If the product has been dropped or the cabinet has been damaged.
- If the product exhibits a distinct change in performance, indicating a need for service.
- When the power cord or plug is damaged or frayed.
• Replacement parts: When replacement parts are required, be sure the service technician has used original
Barco replacement parts. Unauthorized substitutions may result in degraded performance and reliability,
fire, electric shock or other hazards. Unauthorized substitutions may void warranty.
• Safety check: Upon completion of any service or repairs to this projector, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.

1.3 Safety Symbols FL40 / FS40

Description of safety symbols used in product documentation or on product.
Image
EMC:
This is a class A product. In a domestic environment this product
may cause radio Interference in which case the user may be
required to take adequate measures.
警告使用者
此為甲類資訊技術設備，於居住環境中使用時，可能會造成射頻擾動，
RG2 IEC EN 62471-5
在此種情況下，使用者會被要求採取某些適當的對策。
FCC:
This device complies with part 15 of the FCC Rules, Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
CANADA:
This Class A digital apparatus complies with Canadian ICES-003, / Cet appareil numerique
de Ia classe est conforme à Ia norme NMB-003 du Canada.
RG2 IEC EN 62471-5
Safety and environmental information
Description
Refer to user manual for further
information!
Caution! Do not stare into beam,
RG2 product.
No telephone! Do not connect to
telephone lines.
FL40 EMC Label
FL40 RG2 Label
R5910123 /00 FL40 / FS40 Projectors 15