Set-Up; Unpacking And Inspection - AEG PROTECT 1 Series Operating Instructions Manual

4

Set-up

4.1

Unpacking and Inspection

The unit has been completely checked and inspected. Although
the unit has been packed and shipped with the usual care,
transport damage cannot be completely excluded.
i
Check the shipping container for damage on arrival. If
necessary, ask the transport company to check the goods and
make a record of the damage in the presence of the transport
company employee and report the damage to the AEG
representative or dealer within eight days of delivery.
Check that the delivery is complete:
♦ PROTECT 1. with 10000, 15000 or 20000 VA
♦ Cable clamping unit
♦ Special battery connection cable (PROTECT 1.100)
♦ 25-pin parallel operation cable
♦ RS232 communication cable
♦ Management software "CompuWatch" on CD
♦ Operating instructions
Delivery of external battery modules includes:
♦ External battery unit
♦ Battery connection cable
♦ Battery fuses and terminal connectors (PROTECT 1.
Please contact our hotline (see page 5) in case of any
discrepancy.
The original packaging provides effective protection against
mechanical shocks and should be retained so the unit can be
transported safely later on.
Any claims due to transport damage must
always be asserted against the transport
company!
BP20)
22