Operating Modes; Normal Operation - AEG PROTECT 1 Series Operating Instructions Manual

i
21.
6.1

Operating Modes

The following operating modes are distinguished:
Operation with mains supply (6.1.1)
Operation with faulty mains supply (6.1.2)
Operation with faulty inverter (6.1.3)
Manual bypass (6.1.4)
6.1.1

Normal Operation

Netz
Schematische
Darstellung
Energiefluss bei vorhandenem Netz
Handumgehungspfad
Netz
GR
EUE
WR
Netzeingangssicherungsautomat
Schematische Darstellung
Lade GR
Batterie
Handumgehung
Gesicherte Schiene
Verbraucher
Please shut down the entire system again if you
cannot solve a problem that occurs. To do this,
press the OFF pushbutton for approx. 2 seconds.
Disconnect the UPS from the mains by actuating
the mains input miniature circuit breaker (no. 2,
p. 27/28). Please contact our hotline (see p. 5).
When the displays are correctly lit as described,
switch on your loads one after the other. When
doing this, take care not to exceed the maximum
permitted load capacity of the UPS.
Handumgehungspfad
GR
Netzeingangs-
sicherungs-
automat
Lade GR
Batterie
WR
EUE
Hand-
umgehung
Power circuit with mains supply
Manual bypass path
Mains
REC
SBS
INV
Mains input miniature circuit breaker
Schematic diagram
Load REC
Battery
Manual bypass
Secured busbar
Load
39
Energiefluss bei
vorhandenem Netz
Gesicherte
Schiene:
Verbraucher