Safety Regulations; Important Instructions And Explanations; Accident Prevention Regulations - AEG PROTECT 1 Series Operating Instructions Manual

3

Safety Regulations

3.1

Important Instructions and Explanations

The instructions for operation and maintenance, as well as the
following safety regulations must be complied with to ensure
the safety of personnel as well as the continued availability of
the unit. All personnel installing/dismantling, starting up,
operating or servicing the units must be familiar with and
observe these safety regulations. Only trained and qualified
personnel may perform the work described, using tools,
equipment, test equipment and materials intended for the
purpose and in perfect working condition.
Important instructions are emphasized by the words "Caution",
"Attention", "Note" and indented text.
i
3.2

Accident Prevention Regulations

Compliance with the accident prevention regulations valid in the
respective country of use and the general safety regulations in
accordance with IEC 364 is mandatory. The following safety
rules must be observed prior to performing any work on the
PROTECT 1.:
♦ Disconnect the unit from the power supply
♦ Secure the unit against being switched back on
Caution
This symbol identifies all working and operational
procedures requiring absolute compliance to
avoid any danger to persons.
Attention
This symbol identifies all working and operational
procedures requiring absolute compliance to
prevent any damage, irreparable or otherwise, to
the unit and its components.
Note
This symbol identifies technical requirements and
additional information requiring the operator's
attention.
16