Battery Operation / Autonomous Operation - AEG PROTECT 1 Series Operating Instructions Manual

Once you have connected the UPS to a suitable mains
connection, you can start operation using the UPS main switch.
Normally, the UPS operates continuously. The UPS now
supplies the output with voltage, which is signalled by the mains
symbol (Line LED) and the inverter symbol (Inverter LED) being
lit.
This operating mode, generally referred to as "online" mode,
ensures the greatest protection, in particular when there are
mains fluctuations and mains failures, because the loads are
continuously supplied with reliable and "clean" voltage with no
interruptions in this operating mode.
The bar graph LED (LED chain above the pictograph) indicates
the current capacity utilisation of the UPS in this operating
mode (see chapter 8, p. 48 ff).
6.1.2

Battery Operation / Autonomous Operation

Netz
Schematische
Darstellung
Handumgehungspfad
Netzeingangs-
sicherungs-
automat
Lade GR
Batterie
GR WR
EUE
Hand-
umgehung
40
Energiefluss bei
gestörtem Netz
Gesicherte
Schiene:
Verbraucher