Set-Up; Unpacking And Inspection - AEG Protect A. 1000 Operating Instructions Manual

EN
Directives
The PROTECT A. meets the product standard EN 50091.
The CE mark on the unit confirms compliance with the EC
outline directives for 73/23 EEC – Low voltage and for 89/336
EEC – Electromagnetic compatibility if the installation
instructions described in the operating instructions are
observed.
For 73/23 EEC low-voltage directive
Reference number
For 89/336 EMC directive
Reference number
4

Set-up

4.1

Unpacking and Inspection

The unit has been completely checked and inspected.
Although the device has been packed and shipped with the
usual degree of care, damage during transport cannot be
ruled out completely.
i
Check the shipping container for damage on arrival. If
necessary, ask the transport company to check the goods and
make a record of the damage in the presence of the transport
company employee and report the damage to the AEG
representative or dealer within eight days of delivery.
Claims for damage during transport must always
be made with the transport company!
EN 62040-1-1 : 2003
EN 50091-2 : 1995
EN 61000-3-2 : 1995
EN 61000-3-3 : 1995
17