Wireless Arming Stations - Pyronix EURO 46 V10 User Manual

Wireless Arming Stations

Setting and Un-setting
If you are using a tag to set / unset the intruder
system, press any key first (except d), to 'wake'
the wireless arming station before presenting a tag.
Alternatively, if a user code is being used, please
enter the code. The wireless arming station will
automatically 'wake' once the first button is pressed.
After a tag or code has been accepted, choose the
area to set by pressing the a, b, c or d
keys. The key will illuminate indicating
that area has been chosen to be set. Once
confirmed, press the t key.
To unset, simply enter the user code.
Activating the Outputs
Press the d key and enter the Master
Manager Code.
The keys 1 2 3 and 4 will illuminate.
The OP1 – OP4 LEDs will illuminate once the 1-4 numeric
keys have been pressed. Once illuminated, it signifies that
the output has triggered. Press the key again to deactivate
the output.
For information on how these may have been programmed,
please speak to your engineer.
8
Check out our wireless range at www.pyronix.co.uk
EURO 46 V10 User Manual
OP 1 OP 2 OP 3 OP 4
OP 1 OP 2 OP 3 OP 4
OP 1 OP 2 OP 3 OP 4