Engineer Contact Details And Tables; Engineer Information; Certification - Pyronix EURO 46 V10 User Manual

Engineer Contact Details and Tables

Engineer Information

Alarm Company
Date of Installation
Site Reference
Engineer Name
Engineer Contact Number
Installed to Grade
Environmental Class
Your panel is suitable for use in installations designed to meet the European requirements of Security
Grade 2, Environmental Class II. When all parts are working normally, this equipment in combination
with the PSTN or GSM and suitable ARC equipment will meet the requirements of ATS2 /LAN or Wi-Fi
or GPRS meet the requirements of ATS5.
External readers and sirens meet the requirements of environmental class 4.
Number of Code Differs: Tag hex code.
Your panel is designed to automatically inhibit certain functionality. The factory default settings are
shown below:
Intruder Alarm Signal
After 3* unconfirmed alarms in the same area or 1 confirmed alarm.
*This figure is programmable by the Engineer.
Tamper Alarm Signal
After 3* unconfirmed alarms in the same area or 1 confirmed alarm.
*This figure is programmable by the Engineer.
Keypad
After 30 key presses without entering a valid code, keys are disabled for 90 seconds. After
reinstatement, this will be repeated after each 7 key presses until a valid code is entered.
Tag Reader (or tag at a keypad)
If an invalid tag is presented 6 times without a valid tag presented, the respective keypad or reader
will be disabled for 90 seconds. After reinstatement, this state will be repeated after 2 invalid tags are
presented to any reader.

Certification

All wireless devices comply with the following EU requirements:
EMC Directive
Low Voltage
RE Directive
And meet the following standards where relevant:
EN 61000-6-3:2007 +A1:2011
EN 50130-4:2011 +A1:2014
EN 60950-1:2006 +A12:2012
EN 50131-5-3:2005+ A1:2008
30
II
2014/30/EU
2014/35/EU
2014/53/EU
EMC. Generic emission standard. Residential, commercial and
light industry
Immunity requirements for components of fire, intruder and
social Wireless Alarm Systems
Information technology equipment. Safety. General requirements
Grade 2. Interconnections for equipment using radio frequency
techniques
EURO 46 V10 User Manual