Steel Grid Brake Resistors - Danfoss VLT Brake Resistor MCE 101 Design Manual

Installation

3.1.2 Steel Grid Brake Resistors

The steel grid brake resistors are designed for horizontal
mounting only.
NOTICE
3 3
All resistors are cooled by natural convection. To ensure
sufficient airflow and cooling, follow minimum
clearances in Illustration 3.10 and Table 3.3.
Illustration 3.10 Minimum Clearances of all Steel Grid Brake
Resistors - Top View
Illustration 3.11 Minimum Clearances of all Steel Grid Brake
Resistors - Side View
10
Design Guide
150 mm
150 mm
175Uxxxx
Danfoss A/S © Rev. 05/2014 All rights reserved.
Illustration 3.12 Orientation of Steel Grid Brake Resistors
MG90O202