Danfoss VLT Brake Resistor MCE 101 Design Manual page 94

Specifications
1 PE: M4
Torque 2–3 Nm (17.71-26.57 lb-in)
2 Temperature switch connection:
Marked: T1/T2.
Type: PHOENIX G5/2 with Screw Connection
IEC: 0.2-4 mm
UL: AWG 24-12/300 V
9 9
Wire Stripping: 8 mm (0.31 in)
Torque: 0.7 Nm (6.2 lb-in)
3 For temperature Switch Cable:
Clamping Range: 3.5-7.0 mm (0.14–0.28 in)
4 For resistor cable:
Cable gland with internal connection for braid
Clamping Range: 9.0-16.5 mm (0.35–0.65 in)
5 Resistor connection:
Marked RB1/RB2
Type: PHOENIX G10/2
IEC: 0.5-10 mm
UL: AWG 20-6 /600 V
Wire Stripping: 12 mm (0.47 in)
Torque: 1.5-1.8 Nm (13.28-15.94 lb-in)
Illustration 9.15 Connection Box
92
Design Guide
1
2
/500 V
2
/800 V
Danfoss A/S © Rev. 05/2014 All rights reserved.
2
3
4
5
Illustration 9.16 IP65, 3D View
Mechanical mounting (see Illustration 9.11):
•
Vertical with connection box down, or
•
Horizontal
Illustration 9.17 Mechanical Mounting
MG90O202