Danfoss VLT Brake Resistor MCE 101 Design Manual page 10

Installation
3 3
Illustration 3.2 Vertical Mounting, IP54
Versions with Fixed Cables
Horizontal mounting, IP54
For minimum clearances for horizontal mounting for all
aluminium-housed compact and flat-pack brake resistors,
see Illustration 3.3 (top view).
200 mm
Illustration 3.3 Horizontal mounting, IP54
Versions with Fixed Cables
8
Design Guide
200 mm 200 mm
Danfoss A/S © Rev. 05/2014 All rights reserved.
For minimum clearances for horizontal mounting for all
aluminium-housed compact and flat-pack brake resistors,
IP54 versions (versions with fixed cables), see Illustration 3.4
(side view).
Illustration 3.4 Horizontal mounting, IP54
Versions with Fixed Cables
Vertical mounting, IP21 and IP65
For minimum clearances for vertical mounting for all
aluminium-housed compact brake resistors, see
Illustration 3.5 and Illustration 3.6.
200 mm
Illustration 3.5 Vertical Mounting, IP21 and IP65
Versions with Connection Box
200 mm
MG90O202