Huawei 5288 V3 V100R003 User Manual page 115

5288 V3 Server
User Guide
14. Select Set Supervisor Password and press Enter. Set a login password for the super
15. To change the language, select the Main tab to go to the Main screen, as shown in
Issue 26 (2018-11-19)
Figure 5-11 Security
administrator.
Before changing the supervisor password, you need to enter the current supervisor
password. The server is locked after three consecutive failures with wrong passwords.
Restart the server to unlock it.
NOTE
l The default BIOS password is Huawei12#$ for the American keyboard, Huqzei&é34 for the
French keyboard, and Huawei12£$ for the English keyboard.
l When entering the BIOS password on the remote virtual console:
l If the keyboard type configured in the OS is the same as the actual keyboard type, enter
the password by using the actual keyboard.
l If the keyboard type configured in the OS is different from the actual keyboard type,
enter the password by using the keyboard configured in the OS.
l The supervisor password must be a string of 8 to 16 characters, including special
characters (including spaces) and at least two types of the following characters:
uppercase letters, lowercase letters, and digits.
l A new password cannot be the same as one of the previous five passwords.
l After the supervisor password is set, the following menu items are displayed:
l Clear Supervisor Password
l Power on Password
Figure 5-12.
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the 5288 V3
105