Huawei 5288 V3 V100R003 User Manual page 108

5288 V3 Server
User Guide
l
Issue 26 (2018-11-19)
d. Clear alarms. For details, see
NOTE
If the query result in
Check the 5288 V3 using the iBMC CLI.
a. Log in to the iBMC CLI.
i. Set an IP address for the PC, and ensure that the IP address is on the same
network segment as the iBMC management network port.
ii. Connect the PC to the 5288 V3 iBMC management network port by using a
network cable.
iii. Run the Secure Shell (SSH) tool on the PC, and enter the IP address of the
iBMC management network port, user name, and password to log in.
NOTE
By default, SSH is used to log in to iBMC. If the SSH service is disabled, enable it by
choosing Config > Service Settings on the iBMC WebUI.
b. View the 5288 V3 version information.
Check that the 5288 V3 versions meet site requirements.
iBMC / # ipmcget -d ver
------------------- iBMC INFO
-------------------
IPMC
Hi1710
IPMI
2.0
CPLD
(U46)1.05
Active iBMC
(U25)1.62
Active iBMC
2015
Backup iBMC
1.59
SDK
1.51
SDK
2015
Active Uboot
10:24:41)
Backup Uboot
----------------- Product INFO -----------------
Product
Product
BIOS
-------------- Mother Board INFO ---------------
Mainboard
Mainboard
------------------- Flexible NIC INFO -------------------
SM210
SM210
----------------Raid Card INFO -------------------
SR130
SR130
-------------- HDD Backplane INFO --------------
BC11THBK
BC11THBK
BC11THBK CPLD Version:
BC11THBJ
BC11THBJ
BC11THBJ CPLD Version:
Copyright © Huawei Technologies Co., Ltd.
HUAWEI Rack Server AlarmHandling
c indicates that no alarm is generated for the server, skip this step.
CPU:
Version:
Version:
Version:
Built: 22:00:15 Jun 12
Version:
Version:
Built: 17:00:37 May 17
Version: 1.1.35 (Mar 25 2015 -
Version: 1.1.35 (Mar 25 2015 - 10:24:41)
ID: 0x0001
Name: 5288 V3
Version: (U47)1.36
BoardID: 0x0002
PCB: .C
BoardID: 0x0014
PCB: .A
BoardID: 0x002C
PCB: .A
BoardID: 0x00cb
PCB: .A
(U1011)1.05
BoardID: 0x00ca
PCB: .A
(U3)1.05
5 Configuring the 5288 V3
(iBMC).
98