Removing An M.2 Sata Ssd Card - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 7-123 Installing a front mounting ear
Step 7 Tighten the screws. See step (2) in
Step 8 Install the front mounting ear on the side of the chassis front panel and tighten the screws on
the mounting ear. See steps (3) and (4) in
Step 9 Power on the 5288 V3. For details, see
----End

7.59 Removing an M.2 SATA SSD Card

Remove an M.2 SATA SSD card before replacing it with a new one. An M.2 SSD riser card
can be configured with two M.2 SATA SSD cards. The replacement method is the same for
the two M.2 SATA SSD cards. An M.2 SATA SSD card using the external SATA1 port is used
as an example in this topic.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Issue 26 (2018-11-19)
Figure
Copyright © Huawei Technologies Co., Ltd.
7-123.
Figure 7-123.
4.1 Powering On the Server.
1 Safety Instructions.
7 Replacing Parts
239