Removing The Standard Raid Controller Card; Installing The Standard Raid Controller Card - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Step 12 Power on the 5288 V3. For details, see
Step 13 Log in to the RAID configuration screen to check whether RAID configuration needs to be
imported or activated. For details, see the
User
----End

7.31 Removing the Standard RAID Controller Card

Remove the standard RAID controller card before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the riser card if the RAID controller card to be removed is installed on a riser card.
For details, see
Step 8 Check the chip model of the RAID controller card to be removed.
If the chip model of the RAID controller card to be removed is LSI SAS3108, remove the
trans flash module (TFM) first. For details, see
(Standard RAID Controller
If the chip model of the RAID controller card to be removed is PM8060, remove the cable
between the supercapacitor and the RAID controller card. For details, see
Supercapacitor (Standard RAID Controller
Step 9 Remove the SAS cables from the standard RAID controller card.
Step 10 Remove the standard RAID controller card.
l
l
Step 11 Place the removed standard RAID controller card in an ESD bag.
----End

7.32 Installing the Standard RAID Controller Card

Install a standard RAID controller card replace the original one.
Issue 26 (2018-11-19)
Guide.
7.19 Removing the Riser
For details about how to remove a standard RAID controller card on the mainboard, see
7.21.2 Removing a PCIe Card from the
For details about how to remove a standard RAID controller card on a riser card, see
7.21.1 Removing a PCIe Card from a Riser
Copyright © Huawei Technologies Co., Ltd.
4.1 Powering On the
HUAWEI V2&V3 Server RAID Controller Card
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
Card.
7.34 Removing the Supercapacitor
Card).
Card).
Mainboard.
Card.
7 Replacing Parts
Server.
Server.
3.6 Removing the
Cover.
7.34 Removing the
174